Powerful Sandblaster Machine KL-LZQP-A
- Automatic Sand Recycling
- Powerful Surface Cleaning
- Wide Observation Window
- Bright LED Work Light
- Adjustable Blasting Pressure
- Easy Maintenance
Share to:
Overview
The Recyclable Dental Sandblaster is designed for cleaning and polishing dental metal castings, including denture frameworks, crowns, bridges and casting rings. Its pneumatic negative-pressure siphon system automatically recycles abrasive media for efficient, continuous operation.
Powerful sandblasting removes oxide layers and residual investment material from restoration surfaces. A wide sealed observation window and upgraded LED strip provide a clear view of the working area, while the enclosed cabinet helps contain abrasive particles.
Details
The Recyclable Sandblaster is used to polish the surface of the metal castings (denture braces,crown and bridge casting
rings) in restorative dentistry.
It is used especially to remove the oxide layer and remaining investment materials. It achieves automatic sand circulation according to the principle of pneumatic negative pressure siphon.
It also has a delicate design and strong compatibility and it is easy to repair.
It also has the following characteristics: large and wide observation window, strong blasting power. The sealant used on the machine is used for car windows. The cold light source gives better visual effects.
| Specification | Value |
|---|---|
| Power Supply | AC 220V, 50Hz |
| Power Consumption | 25W |
| Pressure Adjustment Range | 0–0.65MPa |
| Working Pressure | 0.6–0.8MPa |
| Air Consumption | >0.15m³/min |
| Dimensions | 380 × 400 × 600mm |
| Weight | 18kg |
1. What materials can this sandblaster process?
It is designed primarily for dental metal castings, including denture frameworks, crowns, bridges and casting rings.
2. What does the sandblaster remove?
It removes oxide layers, residual investment material and surface contaminants from dental castings.
3. Does the abrasive media circulate automatically?
Yes. The pneumatic negative-pressure siphon system recycles the abrasive media automatically during operation.
4. Does the machine require an external air compressor?
Yes. An external compressed-air source is required. Ensure that the compressor meets the machine’s air-pressure and flow requirements before operation.
5. What abrasive media is recommended?
Use clean, washed and thoroughly dried 36–60 mesh silicon carbide abrasive. Replace it regularly and keep it free from debris to prevent nozzle blockage.
EN
FR
AR
ES