Integrated CNC molding
CNC integrated processing and forming of handpiece head, the high concentricity is consistent and not easy to deform, higher accuracy.
German dynamic balance
Each movement of handpiece bearing is balanced by a German dynamic balancing machine. The bearing capacity of the shaft is more even and stable. The noise is lower and service life is longer.
Unique anit-retraction struture
Our anti-retraction structure make it more difficult for the dust generated in the grinding process to enter the bearing and greatly increase service life of handpiece bearings.
External spray- Contra Angle
- cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：30,000rpm
Drill size：CA burs( 2.35)
Key type：Press button
Connection method：E-type connector
Weight：45g
External spray-Straight handpiece
- Cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：40,000rpm
Drill size: HP burs( 2.35)
Key type：Opening/closing clasp
Connection method：E-type connector
Weight：45g
External spray-Air motor
- Cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：40,000rpm
Drill size: HP burs( 2.35)
Connection method：E-type connector
Weight：45g
internal spray- Contra Angle
- cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：30,000rpm
Drill size：CA burs( 2.35)
Key type：Press button
Connection method：E-type connector
Weight：45g
internal spray-Straight handpiece
- cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：40,000rpm
Drill size：HP burs( 2.35)
Key type：Opening/closing clasp
Connection method：E-type connector
Weight：45g
internal spray-Air motor
- cooling system: external water pipe
- Gear ratio： 1:1
Maximum speed：40,000rpm
Drill size：HP burs( 2.35)
Key type：Opening/closing clasp
Connection method：E-type connector
Weight：45g
| Picture |
|
|
|
|
|
|---|---|---|---|---|---|
| اسم | H01 | H02 | HS01 | H01-MINI | H01-45 |
| Body | Copper | Copper | Stainless steel | Copper | Copper |
| Head type | Standard | Standard | Torque | Mini | Standard |
| Head size(mm) | φ10×H10.50 | φ10×H10.50 | φ12.50×H13.05 | φ9.25×H10.60 | φ10×H10.50 |
| Spray | Four spray | Four spray | Four spray | Single spray | Single spray |
| Bearing | Ceramic | Ceramic | Ceramic | Ceramic | Ceramic |
| Fiber Optic | — | — | — | — | — |
| LED | — | — | — | — | — |
| Hygienic head system | √ | √ | √ | √ | √ |
| Press button | √ | √ | √ | √ | √ |
| Connection method | 2holes/4holes | 2holes/4holes | 2holes/4holes | 2holes/4holes | 2holes/4holes |
| Weight | 47g | 48g | 63g | 47g | 48g |
Operation Instruction
It shall be sterilized before the handpiece is used for the first time; sterilization temperature is 135℃ and last for 12 minutes.
After using，Please follow the instruction to sterilize the handpiece：
1-extract the bur from the handpiece，uses the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2-lubricate the handpiece，pour two drops into the air tube one time.
3-wrap it with sterilization package and mark.
AR 
EN 
ES