Integrated CNC molding
CNC integrated processing and forming of handpiece head, the high concentricity is consistent and not easy to deform, higher accuracy.
German dynamic balance
Each movement of handpiece bearing is balanced by a German dynamic balancing machine. The bearing capacity of the shaft is more even and stable. The noise is lower and service life is longer.
Unique anit-retraction struture
Our anti-retraction structure make it more difficult for the dust generated in the grinding process to enter the bearing and greatly increase service life of handpiece bearings.
optic fiber high-speed handpiece
- Head size:φ12×13.1mm
- Workingpressure:0.20-0.25Mpa
- Speed:340,000-360,000rpm
- Power:18W
- Weight:63g
- Ceramic bearing
- Push-button
- Four water spray, water, and air are separated
- 6 holes optic fiber quick coupling
optic fiber stainless steel handpiece
- Head size:φ12×13.1mm
- Workingpressure:0.20-0.25Mpa
- Speed:340,000-360,000rpm
- Power:18W
- Weight:63g
- Ceramic bearing
- Push-button
- Four water spray, water, and air are separated
- 6 holes optic fiber quick coupling
4 Holes quick coupling connector
- 4 holes quick coupling
- Air generator inside
- Fit for Kavo quick coupling handpieces
- LED light
6 Holes quick coupling connector
- 6 holes quick coupling
- Fit for Kavo quick coupling handpieces
- LED light
- Water spray adjustable
6 Holes quick coupling connector
- 6 holes quick coupling
- Fit for NSK quick coupling handpieces
- LED light
Operation Instruction
It shall be sterilized before the handpiece is used for the first time; sterilization temperature is 135℃ and last for 12 minutes.
After using，Please follow the instruction to sterilize the handpiece：
1-extract the bur from the handpiece，uses the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2-lubricate the handpiece，pour two drops into the air tube one time.
3-wrap it with sterilization package and mark.
EN 
AR 
ES